While designing the home, you should match everything. You want your house to look good and stylish. Most people often want to choose the architrave that matches their skirting, and it is easy to find the architrave that matches the skirting design.
But it would help if you chose the proper architrave lengths because only it will give your house a better finish. You might find more than ten different options from which they can choose one! But before understanding the length, you need to know about architrave.
What is Architrave?
An architrave is interior molding found around the window or doorframe. It gives your door or window a finished look and hides the joints or rough surfaces. It acts as trim wherever joints meet the walls or the floor. If you want your doors and windows to look good and beautiful, this is the best solution.
Detail about Architrave
Here are some details you should consider while choosing the architrave to look good when installed in your house.
Width
While installing the architrave in your house, you must ensure you get the right size. The measurement explains how close your door frames must be to your walls.
- In British homes, the joint architrave width is 70mm. Most people have a skirting board of 150 mm or shorter, and a 70mm architrave will suit it the best.
- The following joint width of the architrave is 95mm; when the skirting gets taller, it will get broader. That will also depend on the design you choose.
- After that, one 120 mm width is the least common and is used with the skirting board, which is about 220 mm tall.
Depth
Architrave is generally thicker than the skirting board and helps to achieve a clean transition from one to the other. However, if you look at any modern house, you will see that the architrave and skirting are of the same thickness. That will be possible when your walls are squared perfectly, which is not common in older properties.
Plinth Blocks are the best way to create a transition between the skirting and architrave. When you install them, they will have a traditional feel.
- One of the thinnest thicknesses you can get in your house is 15mm, a standard one. It is the most suitable design you can find, which will help save the floor space in the building. However, this design can sometimes not be manufactured because that section becomes too brittle, and there is a chance of cracking.
- The following and most common thickness of architrave, which you can find in UK houses, is 18mm. That will be heavier than the thinner counterparts, which is relatively more straightforward.
- But if you want to look for the thickest one, you can get 25mm, which is used with the taller skirting. It will be heavy but will fit all the designs.
Length
While getting the architrave of your house, you need to look for the proper architrave lengths.
- 2440 mm length is the shortest and is available commonly, allowing less wastage and covering the standard door.
- The next is 3050mm long, which will be suitable for standard-size doors and get one leg and one head out of 1 length. You can achieve this by cutting the length of the design.
- The most extended length of the architrave is 4200 mm, from which you can get the two legs or four heads out from just one piece of length.
Finish
When it comes to finishes, whether you choose primed or unprimed will depend on your budget; if you select the unprimed one, it will not have any finish and will be raw-state. But in a primed one, you can receive an MDF architrave with a singular layer of primer applied to it. There is a wide range of finished architectural designs; you can choose the one that best suits your interior.